| |
|
|
 |
|
LARGE SIZE GAS FILTER
It shouldn't be used when the gas density volume is over %0.5.
These filters are A2, B2, E2, K2.
The letter and the color code on the filter indicates the gas that
the filter protects. The filter is TS 8185/EN 141 certified. This
kind of filters are used with complete face mask and Arıtan III
half face mask. |
| |
|
|
 |
|
SMALL SIZE GAS FILTER
It shouldn't be used when the gas density volume is over %0.1.
These filters are A1, B1, E1, K1.
The letter and the color code on the filter indicates the gas that
the filter protects. The filter is TS 8185/EN 141 certified. This
kind of filters are used with half face mask. |
| |
|
|
 |
|
COMBINED GAS FILTER
It is used on the surroundings that contains toxic gases and
particles. Consists of gas filter and aerosol filter mix. The
letter and the color code on the filter indicates the gas that the
filter protects.
This kind of filters are used with half face mask |
|
|
|
|
Filter Letter Code |
GAZ FİLTERS
Application
Areas |
|
A |
ORGANIC
VAPORS AND SOLVENTS
Aldehydes, Alcohols, Asetaldehydes, Acetone, Acetonitrile, Benzol,
dioxan, Esters, Etanolamine, Ethers, Fenile hydrasine, Freon,
Ethilalcohol, Ethilasethat, ethilbenzol, ethilen oxide, phenols,
phurphurilealcohol, hydrocarbons, iodemetan, isoprphilalcohol,
carbon tetra chlor, cerosine, cetons, chloroform, methile bromure,
organic vapors, pentachlorethane, perchlor ethilene, pyridine,
propile alcohol, solvents, TNT (Tri nitro toluen), Toluen and etc. |
|
B |
ACID GASES
AND VAPORS
Acid gases, arsine, organic nitrogen compounds, brome, diboran,
phosgen, phosphin, halogens, hydrogen sulphide, carbon di sulphide,
carbonoxi sulphide, chlordioxide, mercaptanes, sulphurile chlor,
cetens, aceticacid, formic acid, hydrofloricacid, silan, phosphor
trichlorur and etc. |
|
E |
SULPHUR DI
OXIDE
Sulphur di oxide, aceticacid, formic acid, hydrofloric acid and
etc. |
|
K |
AMMONIA
Ammonia, Phenilehydrasine, Pyridine, Hydrasine and etc. |
|
NO-P3 |
Nitric
acid, nitric oxides, mist of nitric compunds, ozan and etc.. |
|
HG-P3 |
Mercury
compounds, mercury vapors. |
| |
Aerosoles |
|
P2 |
Zinc oxide,
carbon black, lead mists, quartz, sodium hydroxide,
vanadiumpentaoxide powder mists, metal mists, amines, amonium
bicromate, amonium sulphide, calcium cyanide, calcium nitrate,
chloramine, perlit, barium oxide, asbestos powders and etc. |
|
P3 |
Protects
all the particles in P2. Arsenictrioxide, berilium, DDT powder,
crom oxide, metal mists, amonium arsenate, arsenic and etc. |
| |
Combined Filters |
|
A-P2 |
Benzol
bromure, insect drugs,DD compounds, maleik anhydrite,
poliacrilates and etc. |
|
B-P2 |
Phosphore
trichlorure, hydrogen selenure, iodine, isocyanate,
chlorsulphonicacid, suplhure monochlorure, hydrogen bromure,
amonium polisulphide, calcium sulphide, chlor amine and etc. |
|
E-P2 |
Acids,
hydrochloric acid, sulphur compunds, sulphuric acid, hydrogen
bromure, hydrogen chlorure and etc. |
|
K-P2 |
Aminopyridine and etc.. |
|
A-P3 |
Aceton
cyanhydrine, akrilonytrile, hekazochlorosiclo hekzane, petroleum
gases and vapors, anyline, epichlorhydrine and etc. |
|
B-P3 |
Aceton
cyanhydrine, akrilonytrile, hekazochlorosiclo hekzane, petroleum
gases and vapors, anyline, epichlorhydrine and etc. |
|
K-P3 |
Hydrazine
and etc.. |
ABEK
ABEK-P2
ABEK-P3 |
This kind
of filters should be chosen on surroundings where mixed gases
exist. |
|