Burex ABC 40 Powders

Burex ABC 90 Powders

Burex BC
 

BUREX ABC 40 POWDER

Burex ABC is a minimum 40% monoamoniumphosphate containing powder. By means of it's special design and original production method, it can be used on type A,B and C fires easily.
Also by means of it's compounds that are chosen carefully with the ratios which are determined after experiments, it saves its fluidity and not being tightness for more than 5 years.
BUREX ABC 40 powder is appropriate for TS-EN615 standards and TS 862 - Fire Extinguisher Standards. Also BUREX is the first and the only powder producer firm which has the guarantee certificate dated 05.06.1995 and no:160886 approved by Turkish Patent Institute.

BUREX ABC 40 powder can be used on fires of the hydrocarbon compounds like plastic. It is not advised to use the BUREX powder on metallic fires because of the hydrogen gas that reveals because of the reaction between BUREX powder and metal. The harmony between the BUREX ABC 40 and foam extinguishers is increased after many experiments.

PHYSICAL AND CHEMICAL PROPERTIES
MAIN COMPOUND : Monoamoniumphosphate (%40±2)
APPEARANCE : Is a fluid, an effective extinguishing powder with a structure that has a spreading in air property and contains water pushing materials.
MASS DENSITY (g/ml): 0,93±0,07
SURFACE AREA (cm2/gr): 3000±250
PH VALUE :4,5
LUMPNESS : Some lump can be seen on a fine sieve of 425µm
MOISTURE GATHERING PROPERTY : MAX %0,25
PARTICLE DISTRIBUTION (MICRON) : The amount remaining on the 40 µm fine sieve is %11±%5 ; the amount remaining on the 63µm fine sieve is %31±%8; the amount remaining on the 125µm fine sieve is %21±%8
RESISTANCE TO TEMPERATURE: No chemical changes between -60º C and +90ºC.
WATER PUSHING : ABC 40 is not effected from water and vapor. Can be saved without effecting by temperature and moisture difference. It contains silicon as a water pushing material.
 
STORING PROPERTY :
A- Packing : Can be saved in its original package for 5 years.
B- Can be saved without losing its properties on fire extinguishers and extinguishing foundations.

TRANSPORTING PROPERTY :
BUREX ABC 40 does not lose its properties while passing through hose pipes, pipes and etc. under pressure.

PRESSURE AND GAS PRESSURE PROPERTY :
BUREX ABC 40 is not effected by surrounding pressure. Nitrogen and carbon dioxide can be used as spraying gas.

POWDER CLOUD PRODUCING PROPERTY :
When the device using BUREX ABC 40 runs, a cloud forms in air. This cloud prevents the fire gets wider and has a high effect on it.

RESISTANCE TO VIBRATION
BUREX ABC 40 powder has a resistant power to vibration, movement and crash. Because of this, this kind of powders can be used in transporters, cars, ships and etc.

EXTINGUISHING EFFECT
It forms with the anticatalitic and suffocating effect on type A fires and anticatalitic effect which is the result of breaking the radical chain in the flame on type B and C fires.

CORROSIPHE EFFECT
It has no effect on dry surfaces on metals and alloys. It is adviced to clean the metals after extinguishing because of the salt structure.

CORROSING EFFECT
BUREX ABC 40 has no corrosing effect like sand. It corrupts the oil surface when it remains on the surface. So it is adviced to clean the surface after usage.

PHYSIOLOGICAL EFFECT
BUREX ABC 40 powder has no toxic effects under normal transporting conditions. In addition to that it is adviced to make the refilling station airy. It causes irritation on eyes and noise mucous membrane. It is not a serious state.

PACKING
Can be saved for 5 years in its original 25 and 50 kg. packets.

STORING
- Do not make it contact with air
- Do not make it contact with moisture
- Prevent it from sudden temperature and moist difference
- Do not save under heavy materials.
- Do not mix different type of powders.
- Transport it carefully. Be careful about not tearing the cover. Transfer the powder in the torn packets to a pot without contacting air.
- Be sure that the pot that will contain the powder is dry and clean. Do clear the remaining powders before refilling the new powder in.
- Be careful that the pushing gases are pure and purified from water and other materials that will corrose the pot..

BUREX ABC 90 powder can be used on fires of the hydrocarbon compounds like plastic. It is not advised to use the BUREX powder on metallic fires because of the hydrogen gas that reveals because of the reaction between BUREX powder and metal. The harmony between the BUREX ABC 90 and foam extinguishers is increased after many experiments.

PHYSICAL AND CHEMICAL PROPERTIES
MAIN COMPOUND : Monoamoniumphosphate (%90±3)
APPEARANCE : Is a fluid, chrome yellow colored an effective extinguishing powder with a structure that has a spreading in air property and contains water pushing materials.
MASS DENSITY (g/ml): 0,91
SURFACE AREA (cm2/gr): 3000±250
PH VALUE :4,5
LUMPNESS : Some lump can be seen on a fine sieve of 425µm
MOISTURE GATHERING PROPERTY : MAX %0,25
PARTICLE DISTRIBUTION (MICRON) : The amount remaining on the 40 µm fine sieve is %45±%8 ; the amount remaining on the 63µm fine sieve is %40±%8; the amount remaining on the 125µm fine sieve is %5±%5
RESISTANCE TO TEMPERATURE: No chemical changes between -60º C and +90ºC.
WATER PUSHING : ABC 90 is not effected from water and vapor. Can be saved without effecting by temperature and moisture difference. It contains silicon as a water pushing material.

STORING PROPERTY :
A- Packing : Can be saved in its original package for 5 years.
B- Can be saved without losing its properties on fire extinguishers and extinguishing foundations.

TRANSPORTING PROPERTY :
BUREX ABC 90 does not lose its properties while passing through hose pipes, pipes and etc. under pressure.

PRESSURE AND GAS PRESSURE PROPERTY :
BUREX ABC 90 is not effected by surrounding pressure. Nitrogen and carbon dioxide can be used as spraying gas.

POWDER CLOUD PRODUCING PROPERTY :
When the device using BUREX ABC 90 runs, a cloud forms in air. This cloud prevents the fire gets wider and has a high effect on it.

RESISTANCE TO VIBRATION
BUREX ABC 90 powder has a resistant power to vibration, movement and crash. Because of this, this kind of powders can be used in transporters, cars, ships and etc.

EXTINGUISHING EFFECT
It forms with the anticatalitic and suffocating effect on type A fires and anticatalitic effect which is the result of breaking the radical chain in the flame on type B and C fires.

CORROSIPHE EFFECT
It has no effect on dry surfaces on metals and alloys. It is adviced to clean the metals after extinguishing because of the salt structure.

CORROSING EFFECT
BUREX ABC 90 has no corrosing effect like sand. It corrupts the oil surface when it remains on the surface. So it is adviced to clean the surface after usage.

PHYSIOLOGICAL EFFECT
BUREX ABC 90 powder has no toxic effects under normal transporting conditions. In addition to that it is adviced to make the refilling station airy. It causes irritation on eyes and noise mucous membrane. It is not a serious state.

PACKING
Can be saved for 5 years in its original 25 and 50 kg. packets.

STORING
- Do not make it contact with air
- Do not make it contact with moisture
- Prevent it from sudden temperature and moist difference
- Do not save under heavy materials.
- Do not mix different type of powders.
- Transport it carefully. Be careful about not tearing the cover. Transfer the powder in the torn packets to a pot without contacting air.
- Be sure that the pot that will contain the powder is dry and clean. Do clear the remaining powders before refilling the new powder in.
- Be careful that the pushing gases are pure and purified from water and other materials that will corrose the pot..

 Because of its good quality, and the chemicals been in its structure, it is saving its fluidity and non-tightening feature, in its original packets for more than 5 years.